Seat LEON 2019 Owner's Manual page 66

Changing the number plate bulbs
In the rear bumper: Number plate light.
Fig. 69
number plate light: remove the bulb
Fig. 70
holder.
Follow the steps indicated:
Press the number plate light in the direction
–
›››
of the arrow Fig. 69.
Detach the number plate light.
–
64
Emergencies
›››
Turn the connector lock Fig. 70
–
rection of arrow and pull on the connec-
1
tor.
Rotate the bulb holder in the direction of
–
›››
the arrow Fig. 70 and extract it to-
2
gether with the bulb.
Replace the faulty bulb with a new identical
–
bulb.
Insert the bulb holder into the number plate
–
light and rotate all the way in the opposite
›››
direction to the arrow Fig. 70
Plug the connector into the bulb holder.
–
Insert the number plate light carefully into
–
the opening on the bumper. Ensure that the
number plate light is in the correct position.
Insert the number plate light into the bump-
–
er until it audibly clicks into place.
in the di- Side turn signals
.
2
Turn signal integrated in the rear view
Fig. 71
mirror
The side turn signals are LEDS and are inte-
grated in the rear view mirrors.
In case of failure, go to an authorised work-
shop to have it replaced.
Additional brake light
Taking into account that it consists of LED
bulbs, the change should be made at a tech-
nical service centre.