Seat LEON 2019 Owner's Manual page 121

 It lights up
Trailer turn signals
 It lights up
›››
Main beam on or flasher on page
 It lights up
›››
The Light Assist system is on page
Several warning and control lamps light up
for a few seconds when the ignition is switch-
ed on, signalling that the function is being
verified. They will switch off after a few sec-
onds.
WARNING
›››
Observe the safety warnings
trol and warning lamps on page
Headlight switch
121.
122.
Dash panel: lights control.
Fig. 114
Turn the switch to the required position
●
›››
Fig. 114.
Sym- Ignition switch-
bol ed off
in Con-
90.
Fog lights, dipped

beam and side
lights off.
The "Coming
home" and "Leaving

home" guide lights
may be switched
on.

Side light on.
Dipped beam head-

light off
Lights
The driver is personally responsible for the
correct use and adjustment of the lights in all
situations.
Automatic dipped beam headlight control

The automatic dipped beam control is merely
intended as an aid and is not able to recog-
nise all driving situations.
When the light switch is in position
vehicle lights and the instrument panel and
switch lighting switch on automatically in the
following situations
●
ample, when driving through a tunnel. They
switch off when adequate lighting is detec-
Ignition is
ted.
switched on
●
the wipers. They switch off when the wipers
Light off or day-
time driving light
have not been activated for a few minutes.
on.
Daytime running lights
Automatic control
The daytime running lights consist of individu-
of dipped beam
al lights, integrated in the front headlights.
and daytime run-
ning light.
These lights come on when the daytime run-
ning lights are switched on. On vehicles
equipped with LED tail lights, the rear side
light is switched on as well
Dipped beam
switched on.
The daytime running lights turn on every time
the ignition is switched on, if the switch is in
*
›››
:
The photo sensor detects darkness, for ex-
The rain sensor detects rain and activates
›››
.
, the

»
119