Seat LEON 2019 Owner's Manual page 162

In the Easy Connect system it is also possible
to perform various adjustments to the Clima-
tronic.
Open the air conditioner menu
Press the button of the Climatronic
●

control panel.
On the screen you can view and change the
current settings, such as, for example, the
temperature set for the driver and passenger
sides. Temperatures up to +22°C (+72°F) are
shown with blue arrows, and temperatures
over +22°C (+72°F) with red arrows.
To switch a function on or off, or to select a
submenu, you must press the corresponding
function button.
Function button: Function
: Climatronic is switched off.
OFF
: Climatronic is switched on.
ON
: Synchronise driver and front passenger tem-
SYNC
peratures.
The air conditioning settings submenu is
SETTINGS
opened. The following settings can also be adjusted:
Automatic supplementary heater
activate/deactivate the automatic activation of
the auxiliary heating for colder countries (only
for engines with auxiliary heating). With the op-
tion deactivated, depending on the outside tem-
perature the heating may need more time than
normal to reach a comfortable temperature.
160
Operation
Function button: Function
Air conditioning profile.
power of the fan in AUTO mode. You can choose
between low, medium and high.
Automatic air recirculation
automatic air recirculation on and off
›››
page 161.
 : Close the submenu.
Back
Climate control usage instructions
The interior cooling system only works when
the engine is running and fan is switched on.
Economic use of the air conditioning
When the air conditioning is switched on, the
compressor consumes engine power and has
influence on fuel consumption.
The air conditioner operates most effectively
with the windows and the panoramic sliding
sunroof closed. However, if the vehicle has
heated up after standing in the sun for some
time, the air inside can be cooled more quick-
ly by opening the windows and the panoram-
ic sliding sunroof briefly.
: to
Change the temperature unit (Climatron-
ic)
The temperature display can be changed
from Celsius to Fahrenheit on the screen of
the Infotainment system using the Infotain-
ment button
  
: Adjust the
The cooling system cannot be activated
If the air conditioning system cannot be
: to switch
switched on, this may be caused by the fol-
lowing:
The engine is not running.
●
The fan is switched off.
●
The air conditioner fuse has blown.
●
The outside temperature is lower than ap-
●
proximately +3°C (+38°F).
The air conditioner compressor has been
●
temporarily switched off because the engine
coolant temperature is too high.
Another fault in the vehicle. Have the air
●
conditioner checked by a specialised work-
shop.
Special characteristics
If the humidity and temperature outside the
vehicle are high, condensation can drip off
the evaporator in the cooling system and
form a pool underneath the vehicle. This is
normal and does not indicate a leak!
Note
After starting the engine, any residual hu-
midity in the air conditioner could mist over
.
> Settings > Units