Comfort position: turn the switch to position
●
›››
Fig. 109
.
2
Close: turn the switch to position
●
›››
Fig. 109
.
1
Lift: Push the switch to position
●
. For an intermediate position, hold down
4
the switch until you reach the desired posi-
tion.
Lower: pull the switch to position
●
. For an intermediate position, hold down
5
the switch until you reach the desired posi-
tion.
Opening and closing the sunshade
blind
3 Valid for vehicles: with sun blinds
On the interior roof lining: sunshade
Fig. 111
blind buttons.
Opening and closing
Once the ignition has been switched off, you
can still open or close the sun blind for a few
minutes provided the driver door and the
front passenger door are not opened.
›››
Fig. 110
Opening completely (automatic function)
Press button
●
Closing completely (automatic function)
›››
Fig. 110
Press the button
●
Stop automatic operation
Press button
●
To set the intermediate position
Press button
●
rect position is set.
›››
Fig. 111
briefly.
1
briefly.
2
or button
briefly.
1
2
or button
until the cor-
1
2
Convenience function to open or
close the sunroof*
Door handle: sensor surface.
Fig. 112
The sunroof can be opened and closed with
the convenience function, just like the win-
dows.
Using the door lock*
Hold the key in the door lock of the driver
●
door in either the unlocking or locking posi-
tion to open or close the roof in the tilted po-
sition. Release the key to interrupt this func-
tion.
Using the remote control
Keep the locking or unlocking button press-
●
ed to open or close the roof. If you release the
button is the opening or closing will stop.
»
117