Seat LEON 2019 Owner's Manual page 213

files that take up more space than availa-
ble in the internal memory.
Connect an external audio source
via WLAN*
3 Not available for model: Media System Colour
WLAN allows wireless connection between an
external audio source and the Infotainment
system.
To use this connection, the device being con-
nected must have an app compatible with
the UPnP (Universal Plug and Play) communi-
cation protocol.
Conditions
Having a compatible (UPnP) app installed
●
on the device.
Having the Enable WLAN connection op-
●
tion active, which can be found in the wireless
connection configuration.
Pairing the mobile device to the Infotain-
●
ment system using a password generated by
the system. Pairing must be done from the
device to be connected.
Starting the WLAN audio transfer
Start the UPnP app or the app for the play-
●
back of the WLAN audio source.
Operating modes
In the MEDIA main menu, press the
●
function button and select
WLAN
Please refer to the instructions on the
●
screen of the Infotainment system and on the
WLAN audio source regarding the rest of the
procedure.
Controlling playback
The extent to which the WLAN audio can be
controlled via the Infotainment system de-
pends on the connected WLAN device and
the app that is used.
Note
The Infotainment system does not pro-
●
vide an internet connection, it only estab-
lishes a wireless connection between the
mobile device and said system.
Via the WLAN, only the connection be-
●
tween the device and the Infotainment sys-
tem can be guaranteed, its operation de-
pends on the application itself.
WLAN settings
3 Not available for model: Media System Colour
To access the WLAN settings the ignition must
be switched on.
Select the Media main menu by pressing
●
the infotainment key and then select the

context.
Media
Press the
●
SOURCE SETTINGS
. the Media settings menu.
Press the
●
WLAN
Share connection over WLAN
appear along with information about the use
of WLAN.
Press the function button Share connec-
●
tion over WLAN
WLAN connection
network Configuration .
Press the Configuration function button
●
to configure the WLAN network.
Function button: function
Enable WLAN connection
work.
Security level:
generates an 8 character network key.
: Network key automatically gener-
Network key
ated. Press the function button to manually
change the network key. The network key must
have a minimum of 8 characters and a maximum
of 63.
: Name of the WLAN network of the infotain-
SSID
ment system.
Do not send network name (SSID)
checkbox to deactivate the visibility of the WLAN
network.
To save the changes made to the configura-
tion of the mobile access point, press the
button.
SAVE
function button to open
function button, then the
button will
, then you can Enable
and access the WLAN
: To turn on/off the WLAN net-
WPA2 encryption automatically
: Activate the
211