Seat LEON 2019 Owner's Manual page 41

WARNING
Using the tyre mobility system can be dan-
gerous, especially when filling the tyre at
the roadside. Please observe the following
rules to minimise the risk of injury:
Stop the vehicle safely as soon as possi-
●
ble. Park it at a safe distance from sur-
rounding traffic to fill the tyre.
Ensure the ground on which you park is
●
flat and solid.
All passengers and particularly children
●
must keep a safe distance from the work
area.
Turn on the hazard warning lights to warn
●
other road users.
Use the tyre mobility system only if you
●
are familiar with the necessary procedures.
Otherwise, you should seek professional
assistance.
The tyre mobility set is intended for tem-
●
porary emergency use only until you can
reach the nearest specialised workshop.
Replace the repaired tyre with the tyre
●
mobility set as soon as possible.
The sealant is a health hazard and must
●
be cleaned immediately if it comes into
contact with the skin.
Always keep the tyre mobility set out of
●
the reach of small children.
Always stop the engine, apply the hand
●
brake and put it in gear when using a man-
Self-help
ual gearbox, in order to reduce the risk of
involuntary movement of the vehicle.
WARNING
A tyre filled with sealant does not have the
same performance properties as a conven-
tional tyre.
Never drive faster than 80 km/h
●
(50 mph).
Avoid heavy acceleration, hard braking
●
and fast cornering.
Drive for only 10 minutes at a maximum
●
speed of 80 km/h (50 mph) and then check
the tyre.
For the sake of the environment
Dispose of used or expired sealant observ-
ing any legal requirements.
Note
A new bottle of sealant can be purchased
at SEAT dealerships.
Note
Take into account the separate instruction
manual of the tyre mobility set* manufac-
turer.
Anti-puncture kit contents*
Standard representation: anti-punc-
Fig. 33
ture kit contents.
The anti-puncture kit is located underneath
the floor covering in the luggage compart-
ment. It includes the following components
›››
Fig. 33:
Valve insert remover
1
A sticker to be adhered to the instrument
2
cluster, within the driver's visual field, to
remind that the maximum advisable
speed "max. 80 km/h" or "max. 50 mph"
Filler tube with cap
3
Air compressor
4
ON/OFF switch
5
Air bleed screw (it can also be integrated
6
in the inflator tube).
»
39