Placing in the standby position
Tow hook reserve position
Fig. 299
Towing bracket device*
Reserve position: position verification
Fig. 300
Before assembling it, place the tow hook in
the standby position with the following two
steps.
Insert and turn the key in the direction of the
●
›››
arrow
Fig. 299
until the hole in the key
1
faces upwards (arrow).
Grab the tow hook under the protective
●
cover.
›››
Press the release bolt
Fig. 299
●
direction of arrow
, while pressing lever
2
in the direction of arrow
as far as it will go.
3
The lever will remain blocked in this posi-
●
tion.
Verification of the reserve position
›››
Key
Fig. 300
is in the released posi-
●
A
tion (the key hole is facing upwards).
›››
The release bolt
Fig. 300
●
moved.
›››
Lever
Fig. 300
●
When adjusted in this way, the tow hook is
ready to be installed.
CAUTION
The key cannot be removed or turned in the
standby position.
in the
B
C
can be
B
is in the lower position.
C
317