Seat LEON 2019 Owner's Manual page 352

WARNING
Unsuitable handling of the wheels and
tyres may lead to sudden tyre pressure los-
ses, to tread separation or even to a blow-
out.
The driver is responsible for ensuring that
●
all of the vehicle tyres are correctly infla-
ted to the right pressure. The recommen-
ded tyre pressure is indicated on the label
›››
Fig. 323.
Check tyre pressures regularly and en-
●
sure they are maintained at the pressures
indicated. Tyre pressure that is too low
could cause overheating, resulting in tread
detachment or even burst tyres.
When the tyres are cold, tyre pressure
●
should be that indicated on the label
›››
Fig. 323.
Regularly check the cold inflation pres-
●
sure of the tyres. If necessary, change the
tyre pressure of the vehicle tyres while they
are cold.
Regularly check your tyres for damage
●
and wear.
Never exceed the maximum permitted
●
speed or loads specified for the type of
tyre fitted on your vehicle.
1)
Follow the regulations of the country you are
driving in.
350
Practical tips
For the sake of the environment
Under-inflated tyres will increase fuel con-
sumption.
Tread wear indicators
Tyre profile: tread wear indicators.
Fig. 324
Interchanging tyres.
Fig. 325
Wear indicators around 1.6 mm high can be
found on the base of the original tyre treads,
ordered at regular intervals and running
›››
across the tread Fig. 324. The letters "TWI"
or triangles on the sidewall of the tyre mark
the position of the wear indicators.
The minimum permitted profile depth
been reached when the tyres have worn
down to the wear indicators. Replace the
›››
tyres with new ones .
Changing wheels around
To ensure that the wear is equal on all tyres
the wheels should be changed round from
time to time according to the system
›››
Fig. 325. The useful life of all the tyres will
then be about the same time.
1) have