External Data Storage Device Connected To The Usb - Seat LEON 2019 Owner's Manual

Press the function button. A
●
Remove safely
dropdown menu appears with the following
options: SD1 Card, SD2 Card*, USB1 and
USB2*. Pressing the corresponding function
button disables it.
Press the inserted memory card. The mem-
●
ory card "jumps" to the eject position.
Remove the memory card.
●
External data storage device con-
nected to the USB port

Depending on the features and the country,
the vehicle may have one or two USB con-
›››
nections page 245.
Where this manual refers to external data
storage devices, this means USB mass stor-
age devices containing supported audio files,
such as MP3 players, iPods™ and USB sticks.
Only supported audio files are displayed and
played. Other files are ignored.
Further operation of the external data medi-
um (changing track, selecting tracks and
playback modes) is described in the appro-
›››
priate chapters of this manual
Instructions and restrictions
Compatibility with Apple™ devices and other
media players depends on the unit.
Operating modes
The USB port

age of 5 volts for a USB connection.
External hard disks larger than 32 GB must be
reformatted for the FAT32 file system in some
circumstances. You will find the necessary
software and information on the Internet.
Take into account all other instructions and
limitations regarding requirements for media
sources.
iPod™, iPad™ and iPhone™
Depending on the country and equipment,
iPods™, iPads™ or iPhones™ can be connec-
ted via the device's own USB cable to the ve-
hicle's USB port
ces.
After connecting an iPod™, iPad™ or iPhone™,
the list views specific to the iPod™ are dis-
played at the top selection level (  Play-
,  Artists ,  Albums ,  Tracks ,
lists
etc.).
Podcasts

page 197.
supplies the usual USB volt-
and used as audio sour-

Possible error messages after connecting
external data media
Cause and actions to
Error message
take
It is not possible to play the
external data media or es-
tablish communication with
the adapter cable that is
used.
Source is not
supported.
Check that the external data
media is connected and op-
erates correctly.
If possible, update the exter-
nal data media software.
Communication interrupted.
Device not re-
Check that the external data
sponding.
media is connected and op-
erates correctly.
Due to the large number of different data storage de-
vices and various iPod™, iPad™ and iPhone™ genera-
tions available, it is not possible to guarantee fault-
free operation of all functions described here.
Disconnecting
Data media be prepared for disconnection.
From the main Media menu, press the SET-
●
button to open the Media Settings
TINGS
menu or press the infotainment button
and then press Settings , to open
  
the System settings menu.
»
207