Technical Data; Indications About The Technical Data; Important Information - Seat LEON 2019 Owner's Manual

Technical data

Indications about the
technical data

Important information

Introduction
The values indicated in the technical data
may differ depending on optional equipment
or version of the model, as well as in the case
of special vehicles and equipment for certain
countries.
The information in the official vehicle docu-
mentation takes precedence at all times.
Abbreviations used in the Technical Speci-
fications section
kW Kilowatt, engine power measurement.
Pferdestärke (horsepower), formerly
PS
used to denote engine power.
rpm, 1/min Revolutions per minute - engine speed.
Nm Newton metres, unit of engine torque.
Cetane number, indication of the die-
CZ
sel combustion power.
Research octane number, indication of
RON
the knock resistance of petrol.

Indications about the technical data

Vehicle identification data
Vehicle ID number
The vehicle ID number can be found in the
following places:
In the infotainment system using button
●
   > Vehicle > SETTINGS > Serv-
.
ice > Vehicle ID number
One the vehicle's data label.
●
In front, under the windscreen.
●
To the right in the engine compartment.
●
Type plate
The type plate is located on the vehicle's right
hand door frame. Vehicles for certain export
countries do not have a type plate.
Fuel consumption
Approved consumption values are derived
from measurements performed or supervised
by certified EU laboratories, according to the
legislation in force at the time (for more infor-
mation, see the Publications Office of the Eu-
ropean Union on the EUR-Lex website: © Eu-
ropean Union, http://eur-lex.europa.eu/) and
apply to the specified vehicle characteristics.
The values relating to fuel consumption and
CO emissions can be found in the documen-
2
tation provided to the purchaser of the vehi-
cle at the time of purchase.
Fuel consumption and CO emissions de-
2
pend on the equipment/features of each indi-
vidual vehicle, as well as on the driving style,
road conditions, traffic conditions, environ-
mental conditions, load or number of passen-
gers.
Filling capacities
Tank level
Vehicles with front-wheel drive:
50 l, 7 l reserve
Petrol and die-
sel engines
Vehicles with four-wheel drive:
55 l, 8.5 l reserve
approx. 17.3 kg
Natural gas en-
Additional petrol tank: 9 l, of
gine a)
which approx 7.6 l is a reserve
a) The capacity depends on the efficacy and charac-
teristics of the natural gas pumps. The capacity indi-
cated is based on a minimum loading pressure of 200
bar.
»
373