Seat LEON 2019 Owner's Manual page 78

again or wait several seconds. The speed is
stored and the warning activated.
Deactivate: press button
●
. The stored speed is deleted.

The warning can be adjusted for speeds be-
tween 30 km/h (18 mph) and 250 km/h
(155 mph).
Display Oil temperature
The engine reaches its operating tempera-
ture when, under normal driving conditions,
the oil temperature is between 80°C and
. If the engine is under a lot of stress
120ºC
and the outside temperature is high, the en-
gine oil temperature can increase. This does
not present any problem as long as the warn-
›››
ing lamps or page 336
 
pear on the display.
Warning and information messages
(Vehicle status)
The system runs a check on certain compo-
nents and functions when the ignition is
switched on and while the vehicle is moving.
Faults displayed on the instrument panel as
red and yellow warning symbols accompa-
nied with messages and, depending on the
case, even an audible warning
The representation of the messages and
76
symbols may vary depending on the version
of the instrument panel.
or button
 Existing faults can also be checked manually.
To do so, open the menu Vehicle status or
Vehicle
Priority 1 warning (red)
The symbol lights up or flashes (in part ac-
companied by audible warnings).
driving! Danger! Check the fault and elimi-
nate the cause. If necessary, seek professio-
nal assistance.
Priority 2 warning (yellow)
The symbol lights up or flashes (in part ac-
companied by audible warnings). Operating
faults or the lack of operating fluids can
do not ap-
cause damage to the vehicle or a fault.
Check the faulty function as soon as possible.
If necessary, seek professional assistance.
Information message
It provides information about processes in the
vehicle.
›››
page 89.
Operation
›››
page 74.
Stop

Driver alert system (break recom-
mendation)*
On the instrument panel display: driver
Fig. 77
alert system symbol.
Function and operation
Fatigue detection determines the driving be-
haviour of the driver when starting a journey,
making a calculation of tiredness. This is con-
stantly compared with the current driving be-
haviour. If the system detects that the driver is
tired, an audible warning is given with a
sound and an optic warning is shown with a
symbol and complementary message on the
›››
instrument panel display Fig.
sage on the instrument panel display is
shown for approximately 5 seconds, and de-
pending on the case, is repeated. The system
stores the last message displayed.
The message on the instrument panel display
can be switched off by pressing the
button on the windscreen wiper lever or the
77. The mes-
