Interior Lights - Seat LEON 2019 Owner's Manual

Driving abroad
The light beam of the dipped beam lights is
asymmetric: the side of the road on which
you are driving is lit more intensely.
When a car that is manufactured in a country
that drives on the right travels to a country
that drives on the left (or vice versa), it is nor-
mally necessary to cover part of the head-
light bulbs with stickers or to change the ad-
justment of the headlights to avoid dazzling
other drivers.
In such cases, the regulations specify certain
light values that must be complied with for
designated points of the light distribution. This
is known as "Tourist light".
The light distribution of the halogen and full-
LED headlights allows the specific "tourist
light" values to be met without the need for
stickers or changes in the settings.
Note
"Tourist light" is only allowed temporarily. If
you are planning a long stay in a country
that drives on the other side, you should
take the vehicle to an Authorised Technical
Service to change the headlights.
126
Operation

Interior lights

Lighting of the instrument panel,
displays and switches
Depending on the model, the lighting of the
instrument panel and switched can be adjus-
ted in the Easy Connect system, using the
button
> Vehicle > SETTINGS
  
›››
page 92.
With the ignition on and without light activa-
tion, the analogue instrument panel lighting
remains activated in daytime light conditions.
The lighting is reduced as the exterior light di-
minishes. In some cases, e.g. when driving
through a tunnel without the

tive, the instrument panel lighting may even
switch off. The objective of this function is to
provide the driver with a visual indication that
he or she should activate the dipped beam.
If your vehicle is equipped with a digital in-
strument panel (Digital SEAT Cockpit), the
following message will appear Turn on the
on the instrument panel.
lights
Interior and reading lights
Detail of roof lining: front lighting of
Fig. 119
the passenger compartment.
Knob Function
function ac-

Turns off the interior lights.

Turning the interior lights on or off.
Door contact connection.
The interior lights come on automati-
Central po-
cally when you unlock the vehicle,
sition
open a door or remove the key from
or
the ignition.
The light goes out a few seconds after

a)
closing all the doors, when locking the
vehicle or connecting the ignition.
Turning the reading light on and off
 
/
a)
Depending on version.