General Instructions For Use - Seat LEON 2019 Owner's Manual

General instructions for use

Introduction
Related video
Fig. 176
If the setup is changed, this may change the
display on the screen and the Infotainment
system may behave in a manner different to
that described in this manual.
Note
Just press a button or the screen to use
●
the infotainment system's functions.
The equipment's software depends on
●
the market in question, so it is possible that
not all of the function buttons or described
functions are available. The equipment is
not faulty if a function button is missing.
Due to country-specific legislation, cer-
●
tain functions may not be available on the
screen when the vehicle is travelling above
a certain speed.
Using a mobile telephone inside the vehi-
●
cle may provoke noise in the speakers.
Restrictions on the use of devices using
●
Bluetooth ® technology may apply in some
Introduction
countries. For further information, contact
the local authorities.
On vehicles with ParkPilot, the audio vol-
●
ume is automatically lowered when reverse
gear is selected. The volume can be low-
ered in the menu Sound > Volume .
Diagram of the menus
Main menu
Fig. 177
The Infotainment system touchscreen can be
used to select the different main menus.
Press the Infotainment button
  
open the menus summary.
The display of the touchscreen's main menu
can be switched between "grid" and "carou-
sel" and vice-versa using the menu Settings
›››
page 173.
> Screen
Note
Depending on the infotainment version,
there may be more icons on the second
page. In this case, to see the remaining
icons press the function button
(arrow) or slide your finger horizontally
across the screen.
Rotary push buttons and infotain-
ment buttons
Rotary/push buttons
The left rotary push button
button if pressed and the volume knob if
turned.
Infotainment buttons
The buttons on the unit are shown in this
manual with the word "infotainment button"
and their function within a rectangle, for ex-
ample, the infotainment button
The Infotainment buttons are used by press-
ing them or pressing and holding.
to
Switching on and off
When the system is turned on, it starts up with
the volume at which it was turned off, as long
as it does not exceed the preset maximum
start-up volume. Select Sound > Volume .
›››
Fig. 177
is the on/off

.
  
»
169