Seat LEON 2019 Owner's Manual page 196

Manually tuning a station frequency
Display the Press the
›››
frequency ton Fig.
band
Turn the adjustment knob.
Changing the
frequency step
OR: Press the
by step
dial displayed on the screen.
Press and hold one of the arrow
buttons on the left of the multifunc-
tion steering wheel. Releasing the
button switches to the next radio
Quickly track
station that can be tuned.
the frequency
band
OR: Keep your finger on the scroll
button in the frequency band and
move your finger to move the but-
ton.
Briefly press the settings button.
Selecting a station using the mem-
Hide the fre-
ory button also ends the manual
quency band
selection of frequencies. If no oper-
ations are performed, the frequen-
cy band is hidden after a while.
Presetting stations
Press and hold the desired preset
›››
button
Saving the sta-
signal is heard.
tion that is be-
ing listened to.
The tuned station is stored on a
preset button.
194
Presetting stations
function but-
Manual
195.
or keys on the
+ –
Saving a sta-
tion from the
stations list
Delete preset
stations
Automatic playback (SCAN)
Fig. 195 until an audible
When automatic playback is active, all tune-
able stations in the selected frequency band
are played for approximately 5 seconds
each.
Infotainment System
›››
Press the Fig. 195
Stations
function button to open the station
list.
The stations that are already stor-
ed on a memory key are marked on
the station list with the symbol 
›››
Fig. 196.
Select the desired station by
pressing and holding it down on
the screen. A screen opens for sav-
ing the station on the memory but-
tons.
Press the memory key where the
station will be saved.
A sound is heard and the station is
saved on the memory button. Re-
peat the process to continue sav-
ing other station on the list.
The Settings menu can be used
to delete all of the saved stations
together, or separately
›››
page 195.
Start and end automatic playback
Start automatic Press the
Settings
playback and then select
Scan
Press the function button to

stop automatic playback on the
station that is being played.
End automatic
Automatic playback also ends
playback
when a station is selected man-
ually using the memory buttons,
or when the screen is changed.
Traffic information (TP)
It is only possible for traffic information to be
tracked with the TP function if the station in
question can be tuned. Stations with the traf-
fic information function are shown on the RA-
DIO main menu and on the station list with
››› ›››
the symbol TP Fig. 195 and
Some stations without their own traffic infor-
mation support the TP function by broad-
casting traffic announcement from other sta-
tions (EON).
Activating and deactivating the TP func-
tion
In the Settings (FM, AM, DAB) menu,
●
activate or deactivate the
 
function button by
Traffic programme (TP)
›››
pressing it page 195.
function button
.
Fig. 196.