Securing the retainer strap
Follow the manufacturer's instructions to
●
deploy the child seat Top Tether retaining
strap.
Place the belt under the headrest of the
●
›››
back seat
Fig. 30
(depending on the in-
structions of the chair itself, lift or remove the
headrest if necessary).
Slide the strap and secure it properly with
●
the anchorage of the backrest
Fitting a child seat using the seat belt
If you want to fit a universal approval catego-
ry (U) child seat in your vehicle, you must
check that the seat is approved for your vehi-
36
Firmly tighten the strap following the manu-
●
facturer's instructions.
Releasing the retaining strap
Loosen the strap following the manufactur-
●
er's instructions.
Push the lock and release it from the an-
●
choring support.
›››
Fig.
31.
cle. You will find any necessary information
on the child seat's orange ECE approval la-
Safety
bel. The following table shows the different
fitting options.
WARNING
An undue installation of the safety seat will
increase the risk of injury in the event of a
crash.
Never tie the retainer strap to a hook in
●
the luggage compartment.
Never secure or tie luggage or other
●
items to the lower anchorages (ISOFIX) or
the upper ones (Top Tether).