Seat LEON 2019 Owner's Manual page 77

Table of Contents

Advertisement

Vehicles with digital instrument panel:
While in Travel data > General infor-
press
on the multi-function steer-
mation

ing wheel to switch between the 3 memo-
ries
1)
:
The memory is deleted if the
From start
journey is interrupted for more than 2
hours.
Display and storage of
Since refuelling
the journey data and the consumption
values collected. When refuelling, the
memory is deleted.
This memory contains travel data
Long-term
up to a maximum of 19 hours and 59 mi-
nutes or 99 hours and 59 minutes, or up
to a maximum of 1999.9 km or
9999.9 km. When one of these values is
exceeded (varies depending on the ver-
sion of the instrument panel), the memo-
ry is deleted.
Delete journey data presets
Select the memory that you wish to erase.
Hold the
button of the multifunction

steering wheel or the
button of the multi-

1)
This will show all data on the display at the
same time: distance travelled, average con-
sumption, average speed and autonomy.
2)
Not available in all countries.
Instruments and warning/control lamps
function wheel pressed down for about 2
seconds.
Select the instructions
In the Infotainment system, in the menu Vehi-
cle settings, you can display different travel
›››
data
page
92.
The current fuel
Current consumption
consumption display operates through-
out the journey, in litres/100 km; and with
the engine running and the vehicle stop-
ped, in litres/hour.
The average fuel
Average consumption
consumption is displayed after driving
for approximately 300 metres.
This indicates the hours
Travelling time
(h) and minutes (min) since the ignition
was switched on.
Approximate distance in km that can
Range
still be travelled if the same driving style
is maintained.
or Autonomy 
Adblue Autonomy
mate distance in km that can still be
travelled with the current level of the
AdBlue
®
tank with the same driving style.
The indication appears from a range of
less than 2,400 km and cannot be de-
activated.
2)
Distance covered in km (m) after
Distance
switching on the ignition.
Average speed
shown after driving for approximately
100 metres.
Digital speed
digital format.
Convenience consumers
the connected comfort systems that in-
crease energy consumption, e.g. air
conditioning.
Setting a speed warning
Select the display Warning at --- km/h
or Speed warning at --- mph .
Press the button
wiper lever or the button
tion steering wheel to store the current speed
and activate the warning.
Activate: adjust to the desired speed within
Approxi-
5 seconds using the rocker switch
windscreen wiper lever or by turning the
thumbwheel on the multifunction steering
wheel. Next, press the button
The average speed will be
Current speed displayed in
Displays a list of
on the windscreen

on the multifunc-

on the

»
or


75

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents