Seat LEON 2019 Owner's Manual page 288

Indications on the instrument panel
display
On the instrument panel display: In-
Fig. 282
dication on the Lane Assist system display (ex-
ample 1).
286
Driving
On the instrument panel display: Indi-
Fig. 283
cation on the Lane Assist system display (ex-
ample 2).
Status display
– Fig. 282 : The system is active, but not

available, either because the minimum
speed has not been reached or because
the lane lines are not recognised.
– Fig. 282 : The system is active and

available, both lane lines are recognised.
The steering angle is not being correc-
ted at this moment.
›››
– Fig. 283 Fig. 282 : The system is op-

erational, the highlighted line
cates that there was a risk of involuntari-
ly crossing the lane line and that the
steering is being adjusted to correct the
angle.
– Fig. 283 : The two highlighted lines

and light up simultaneously when
2
both lane lines are recognised and the
Lane Assist function is activated.
Operating mode
Steering wheel vibration
The following situations can cause vibration
in the steering wheel and require the driver to
take active control of driving:
When the steering angle assist value re-
●
quired to keep the vehicle in the lane is higher
than the system's maximum operating value.
If the system ceases to display the lane
●
lines while assisting with steering.
Switching the Lane Assist system on or off
Select the corresponding menu option us-
●
ing the button for the driver assistance sys-
›››
tems page 89.
OR: by using the Easy Connect system with
●
button
 > Vehicle > SETTINGS >
›››
page 92.
Driver assistance
indi-
1
1