Retaining tabs on reverse side of tail
Fig. 64
light.
Check which of the bulbs is defective.
–
Open the rear lid.
–
Remove the cover by prying the flat side of
–
a screwdriver into the recess and remove
the cover from the opening
Carefully loosen the screw located behind
–
the cover with a screwdriver, turning it anti-
›››
clockwise (arrows)
Fig. 63
Tilt the light in the direction of the arrows
–
until it comes out of its housing (positions
›››
and
)
Fig.
63.
4
Remove the bulb holder
–
ing the retaining tabs
1
Change the damaged bulb.
–
To refit follow the steps in reverse order, tak-
–
ing special care when fitting the bulb hold-
er. The securing tabs must click into place.
62
CAUTION
Take care when removing the rear light unit
to make sure there is no damage to the
paintwork or any of its components.
Note
Make sure you have a soft cloth ready to
place under the glass on the rear light unit,
to avoid any scratches.
›››
Fig. 63
.
1
.
2
3
›››
Fig. 64
unlock-
.
Emergencies
Tail lights bulbs located in the rear
lid
Remove the cover from the boot lid and
Fig. 65
detach the bulb holder.