ACC operation
On the left of the steering column: op-
Fig. 276
erating the ACC with the third lever.
On the left of the steering column: op-
Fig. 277
erating the ACC with the third lever.
When the ACC is connected, the green con-
trol lamp
will light up on the instrument
panel, and the programmed speed and ACC
status will be displayed
280
What ACC settings are possible?
Connecting and activating the ACC
●
›››
page
Setting your speed
●
Setting your distance
●
Disconnecting and deactivating the ACC
●
›››
page
Adjusting the default distance level at the
●
start of your journey
Adjusting the driving profile
●
Conditions in which the ACC does not re-
●
›››
act
Connecting and activating the ACC
To connect and activate the ACC, the posi-
tion of the gearbox lever, the vehicle speed
and the position of the third level of the ACC
must all be taken into account.
With manual transmission, the gear lever
●
must be in any gear except first. With auto-
matic transmission, the gear lever must be in
position D or S. Speed must be higher than
30 km/h (18 mph) approx.
To activate the ACC, move the third lever to
●
position
ACC is not active and there is no program-
med speed.
Next, press button
●
›››
Fig.
274.
move the lever to position
›››
Fig. 276
Driving
280.
›››
page
280.
›››
page
280.
281.
›››
page
281.
›››
page
page
281.
›››
Fig. 276
. At this time, the
1
›››
Fig. 277
B
. At this moment the ACC is ac-
2
tivated and the current speed and distance
are programmed. The picture in the box will
change to Active mode
While ACC is active, the vehicle travels at a
set speed and distance from the vehicle
ahead. Both speed and distance can be
changed at any time.
Setting speed
To set the speed, move the third lever up
●
281.
or down
to the desired speed
–
›››
Fig. 274
. The speed adjustment is made
6
at 10 km/h (6 mph) intervals.
If you wish to increase speed by intervals of
●
1 km/h (0.6 mph), move the lever to position
›››
Fig. 276
2
›››
button
Fig. 277
The set speed can be changed when the ve-
hicle is stopped or during driving.
Setting your distance level
To increase or reduce the distance, press
●
button
to the right or left
A
The instrument panel display modifies the se-
›››
lected distance
Fig. 274
distance levels to choose from. SEAT recom-
mends level 3. The set distance can be
changed when the vehicle is stopped or while
or
›››
driving
.
›››
Fig. 274
.
+
, or to decrease it press
.
B
›››
Fig.
277.
. There are 5
4