Section 3. Set-Up; Set-Up Menu - Agilent Technologies VS Series Operation Manual

VS Series Helium Mass Spectrometer Leak Detectors

Section 3. Set-Up

3.1 Set-Up Menu

The Set-Up menu screen contains buttons for functions that deal with machine
performance, tuning, and maintenance issues. All sub-screens below this level have a
Home button that returns the program directly to the Home screen (Figure 1-14 on
page 1-21).
Press Set-Up on the Menu screen to open the Set-Up screen. The Set-Up menu can
❑
be password protected. See Section 3.1.9 "Password" on page 3-24.
Press the right arrow and then Maintenance on the Set-Up screen to access the
❑
password change mechanism and enable or disable the password feature.
The password can also be read off the RS-232 connector (see Appendix A
"Communications Protocol").
The items configured using the Set-Up sub-screens significantly
CAUTION
affect the performance of the leak detector and must only be
accessed by trained service personnel.
Many of the values for the parameters included on the Set-Up
sub-screens are calculated when the leak detector performs
functions such as Calibrate and tuning. Changing these values
can cause unreliable test results.
0 1 2 3 4
ADVANCED
PARAMETERS
OUTPUT
CONTROL
Figure 3-1 Set-Up Screen - Initial
5 6 7 8 9
MANUAL
MANUAL
VALVE
TUNING
CONTROL
UNITS LANGUAGES
C
10
3-1