Agilent Technologies VS Series Operation Manual page 152

Specifications
Storage Ambient
Conditions
Power Requirements
Dimensions
Weight
LCD display
Regulatory
Single rotation speed
Leak test range
Maximum spectrometer
pressure
Contra cross over
Sensitivity in High
Pressure Test mode
C-2
VS Series Helium Mass Spectrometer Leak Detectors
Table C-1 Leak Detector Series Specifications (Continued)
VS Series Helium Mass Spectrometer Versions
Relative humidity: 0% to 95%, non-condensing. Temperature:
20 °C ( 4 °F) to +60 °C (140 °F)
Input Power
100 VAC, 50 Hz, 20 A
❑
115 VAC, 60 Hz, 20 A or
❑
230 VAC, 50/60 Hz, 12 A
❑
Max. Branch Circuit Breaker: 20A with motor-rated time delay.
See outline drawings (Figure 1-1 on page 1-4 to Figure 1-11 on page 1-15).
PR02 with built in DS-42 mechanical pump: 38 kg*
MR15 w/DS-302 rotary vane pump on cart: 85 kg*
MD15 w/IDP-15 dry scroll pump on cart: 98 kg*
MD30+ w/TS-620 dry scroll pump on cart: 96 kg*
PD03 with IDP-3 dry pump: 40 kg*
* Add 1.0 kg if the Wireless Remote and optional I/O features are installed.
Size = 112 mm x 150 mm, overall, 90 mm x 115 mm viewing area (HxW)
Color, ¼ VGA (320 x 240), backlit.
Safety:
Low Voltage Directive (LDV) 73/23/EEC:1973 as Amended by 93/68/EEC:1993
❑
EMC:
Electromagnetic Compatibility (EMC) Directive 89/336/EEC:1989 as Amended by
❑
93/68/EEC:1993
Radio and Telecommunication Terminal Equipment (R&TTE) Directive, 1999/5/EC:
❑
1999
For particular Safety and EMC Standards see Declaration of Conformity.
Turbo: 70K RPM
E-11 to E-4
1E-04 Torr - Filament turns off when pressure exceeds this point
10 Torr decreasing, 12 Torr increasing
-8
1 x 10 atm.cc.sec