Hazard And Safety Information - Agilent Technologies VS Series Operation Manual

VS Series Helium Mass Spectrometer Leak Detectors

Hazard and Safety Information

The common international symbols used in this manual and on the equipment are defined
below.
°
l
Operators and service personnel must be aware of all hazards associated with this
equipment. They must know how to recognize hazardous and potentially hazardous
conditions, and know how to avoid them. The consequences of unskilled, improper, or
careless operation of the equipment can be serious. Every operator or service person must
read and thoroughly understand operation/maintenance manuals and any additional
information provided by Agilent. All warning and cautions must be read carefully and
strictly observed. Consult local, state, and national agencies regarding specific requirements
and regulations. Address any safety, operation, and/or maintenance questions to your
nearest Agilent office.
OFF Supply (Power)
ON Supply (Power)
AC – Alternating Current
Warning, Risk of danger
Frame or chassis Terminal
Indoor, Dry Location Use
Only
Earth (Ground) Terminal
Caution, Hot Surface
Caution, Risk of Electrical
Shock
Protective Conductor
Terminal
Do Not Place in Trash
Caution, Radio
Restriction
xii