Display Panel Controls - Agilent Technologies VS Series Operation Manual

VS Series Helium Mass Spectrometer Leak Detectors

1.5 Display Panel Controls

Screen
Home
Control Panel
Menus
1-22
Table 1-3 Screens – General Description
Accesses the Control Panel and Menu screens.
Activates the Zero function. The LED illuminates while zeroing occurs.
Accesses the Gross Leak Test screen, when Gross Test is initiated.
Activates/deactivates:
Std Leak
❑
Zero Enable
❑
Hold
❑
Calibrate
❑
Displays the type of leak: Internal or external, associated with Calibrate.
Adjusts the speaker volume.
Accesses the following screens for tailoring leak detector operation:
Calibration Set-Up – Configures leak type, mode and parameters
❑
(Section 2.2.4.1 on page 2-17).
Reject & Audio Set Points – Configures parameters and toggles operations
❑
on/off for each reject set point and for the audio threshold
(Section 2.2.4.2 on page 2-19).
Leak Ranging – Configures the Range Stop, Manual Range values, toggles
❑
the high pressure test feature and toggles operations on/off
(Section 2.2.4.4 on page 2-25).
Transfer Pressure – Configures the Maximum Test Pressure
❑
(Section 2.2.4.5 on page 2-28).
System Information – Displays the status of configured and active items
❑
(Section 2.2.4.6 on page 2-30).
Control Panel Access – Activates/deactivates Vent and Panel Lockouts
❑
(Section 2.2.4.7 on page 2-32).
Auto Sequencer – Configures roughing and test times, toggles features
❑
on/off and displays rough timer value (Section 2.2.4.3 on page 2-22).
Set-Up - Accesses all the screens shown in Figure 1-14 on page 1-21.
❑
Purpose