VS Series Helium Mass Spectrometer Leak Detectors
2.2.4.7 Control Panel Access
Press Control Panel Access on the Menus screen.
❑
The Control Panel Access screen appears (Figure 2-16). Use it to enable the Vent
and Panel lockouts.
Toggles these
options on/off.
Vent Lock
Panel Lockout
2-32
0
1
2
3
4
CONTROL PANEL ACCESS
VENT LOCKOUT
✔
✕
Figure 2-16 Control Panel Access
Disables the VENT button. This option prevents accidental system
venting during test while under remote or PLC control. The Vent
Lock feature is not active when the Auto Sequencer is on.
Disables the front panel buttons, TEST and VENT and access to the
Control Panel screen. This is primarily used while the system is
under PC or PLC control.
5
6
7
8
9
PANEL LOCKOUT
✔
✕
10
-
10
DONE