Leak Detector Linear Output Voltage - Agilent Technologies VS Series Operation Manual

VS Series Helium Mass Spectrometer Leak Detectors
*Standard and High Sensitivity Versions
Figure 3-10 Leak Detector Logarithmic Output Voltage
Log + Linear – both log and linear bar graphs appear across the top of the Home screen
while all other screens only display the linear bar graphs across the top.
3-14
Figure 3-9 Leak Detector Linear Output Voltage
Log Only
❑
The log bar graph leak rate appears across the top of all
screens. In Log Bar Graph display mode, the bar graph
display represents the entire leak rate range of the leak
detector, spanning from 10
cc/sec. The numerical display (located to the upper right of
the bar graph) is not lit in this mode.
Output Voltage = Leak Rate Mantissa
Leak Rate Mantissa = Output Voltage
Output Voltage (Volts)
11
11
V = LOG (Leak Rate X 10 )
V 11
Leak Rate = 10 /10
Output Voltage
4
atm cc/sec to 10 atm