Section 3.1.8.3.1 "Cal Leak Expiration Set-Up - Agilent Technologies VS Series Operation Manual

VS Series Helium Mass Spectrometer Leak Detectors
3.1.8.3.1 Cal Leak Expiration Set-Up
Press the button next to the Cal Leak Expiration text on the Internal Calibrated Leak
❑
screen.
The Cal Leak Expiration Set-Up screen appears (Figure 3-18).
The Cal Leak Expiration is usually one year from leak installation. When the
calibrated leak expires, a message appears on the Home screen.
0
Accesses the
Year keypad.
Activates the field.
Use the arrows to
set the value
To use this screen:
1. Press the button next to Year or Month and a keypad appears to set the value.
2. Press Done for each item configured.
3. Press the button next to Day, use the up and down arrows to set the value and press
Done.
4. Press OK to exit the screen.
1 2 3 4
CAL LEAK EXPIRATION SET-UP
2006
YEAR
AUG
MONTH
Figure 3-18 Cal Leak Expiration Set-Up
5 6 7 8 9
02
DAY
CANCEL
00
-
10
Accesses the
Day keypad.
OK
DONE
3-23