Unpacking The Leak Detector - Agilent Technologies VS Series Operation Manual

VS Series Helium Mass Spectrometer Leak Detectors

1.2 Unpacking the Leak Detector

The following items are included in the shipment:
VS Series Helium Mass Spectrometer Leak Detectors Operations Manual
❑
VS Series leak detector configured and completely assembled as ordered
❑
All necessary power cords, as ordered
❑
Pump manuals (for the purchased configuration)
❑
Any optional equipment ordered
❑
Any manuals for optional equipment purchased
❑
1.2.1 Unpacking Instructions
To unpack the leak detector and remove it from the skid:
1. Inspect the container for evidence of damage in shipment.
a. Do not discard evidence of rough handling.
b. Report the damage to the carrier and to Agilent Customer Service without delay. See
the back cover of this manual for a listing of our sales and service offices.
2. Wear safety glasses and carefully cut the outer container holding straps.
3. Carefully remove the outer shipping container.
4. Inspect the leak detector and related items immediately for any indication of shipping
damage.
5. Carefully cut the leak detector holding straps.
6. Remove any loose boxes or packages and put them aside.
Keep the original packing for re-use in the event that it is necessary to return the leak
detector to Agilent.
7. Carefully remove the plastic bag covering the leak detector.
Proceed to Section 1.2.2 "Removing the Leak Detector from the Skid".
1-6