Install Slide Block - KidKraft Cedar Summit Lookout Extreme Installation And Operating Instructions Manual

Step 45: Install Slide Block
A: Center (451) Slide Block so that it's under the (422) TNR Front Support and behind the (401) TNR Brace Support.
Attach (451) Slide Block to the (422) TNR Front Support from the outside using 2 (S11) #8 x 2" Wood Screws.
(fig.45.1 and 45.3)
B: Check to ensure that Brace Assembly is square and then install 2 (S11) #8 x 2" Wood Screws from the outside into
each side of the (401) TNR Brace Support. From the inside install 3 more (S11) #8 x 2" Wood Screws to attach (451)
Slide Block to the (401) TNR Brace Support. (fig.45.1, 45.2 and 45.4)
Fig. 45.2
Inside View
S11
#8 x 2" Wood Screw
Fig. 45.3
Outside View
451
Wood Parts
1 x Slide Block 1-1/4 x 3-1/4 x 8-3/4"
451
451
401
#8 x 2" Wood Screw
422
S11
401
#8 x 2" Wood Screw
Hardware
9 x #8 x 2" Wood Screw
S11
Fig. 45.4
each side
S11
401
86
Fig. 45.1
S11
422
451
S11
401