KidKraft Cedar Summit Lookout Extreme Installation And Operating Instructions Manual page 27

Step 5: Large Rock Wall Frame Assembly
Part 2
E: Taking care to note hole orientation place (063) Rock Wall A as shown in fig.5.6 and attach to (053) Rock
Support Back and (054) Rock Wall Floor Cross using 2 (WB2) 5/16 x 1-3/8" Wafer Head Bolt (with flat washer and
t-nut) and 4 (S20) #8 x 1-3/8" Wood Screws. (Fig. 5.5 and 5.6)
F: Attach (059) Rock Wall Angle Cross to (063) Rock Wall A and (058) Rock Wall C using 2 (WB2) 5/16 x 1-3/8
Wafer Head Bolt (with flat washer and t-nut) and 4 (S20) #8 x 1-3/8" Wood Screws as shown in fig. 5.5 and 5.6.
Fig. 5.5
Wood Parts
1 x Rock Wall A 1-1/4 x 2-1/4 x 84"
063
1 x Rock Wall Angle Cross 1-1/4 x 3 x 13-3/4"
059
8 Places
063
059
058
Rock Wall frame, front view
Hardware
8 x #8 x 1-3/8" Wood Screw
S20
4 x 5/16 x 1-3/8" Wafer Head Bolt
WB2
(5/16" flat washer, 5/16" t-nut)
27
Fig. 5.6
WB2
5/16" flat
5/16"
washer
t-nut
beveled edge on this side for all ho
8 Places
4 Places
S20