Narrow Wall Frame Assembly - KidKraft Cedar Summit Lookout Extreme Installation And Operating Instructions Manual

Step 6: Narrow Wall Frame Assembly
A: Place (051) Rock Wall H and (062) Narrow Wall D together so that they are connected at the notched ends.
Attach using 1 (H10) 1/4 x 2-1/4" Hex Bolt (with lock washer, flat washer and t-nut). (Fig. 6.1 and 6.2)
B: Place (057) Narrow Wall A on the left side of the frame assembly so that the top ends of the boards line up,
making sure to note hole orientation. Place 1 (064) Narrow Wall Cross in each of the 2 locations shown in fig.
6.3 and attach using 2 (WB2) 5/16 x 1-3/8" Wafer Head Bolts (with flat washer and t-nut) and 4 (S20) #8 x 1-3/8"
Wood Screws per board. (Fig. 6.3 and 6.4)
C: Place (065) Narrow Wall Angled Cross as shown in fig. 6.3 and attach using 2 (WB2) 5/16 x 1-3/8" Wafer Head
Bolts (with flat washer and t-nut) and 4 (S20) #8 x 1-3/8" Wood Screws per board. (Fig. 6.3 and 6.4)
Fig. 6.1
051
062
Wood Parts
1 x Rock Wall H 1-1/4 x 2-1/4 x 75-63/64"
051
1 x Narrow Wall D 1-1/4 x 2-1/4 x 52-49/64"
062
1 x Narrow Wall A 1-1/4 x 2-1/4 x 84"
057
2 x Narrow Wall Cross 1-1/4 x 3 x 8-3/32"
064
1 x Narrow Wall Angled Cross 1-1/4 x 3 x 11-1/4"
065
Narrow Wall A
5/16" Flat Washer
609214
Fig. 6.2
062
051
1/4" lock
1/4"
washer
t-nut
1/4" flat
washer
Fig. 6.4
057
WB2
6 places
5/16" flat
washer
#8 x 1-1/2" Wood Screw
12 x
52042512
1 x
6 x
Narrow Wall Cross
609220
Fig. 6.3
057
H10
Note hole
orientation
S20
5/16"
t-nut
065
6 places
Hardware
#8 x 1-3/8" Wood Screw
S20
5/16 x 1-3/8" Hex Bolt (with 1/4" lock washer,
H10
1/4" flat washer and 1/4" t-nut)
5/16 x 1-3/8" Wafer Head Bolt w/ Nylok
5/16 x 1-3/8" Wafer Head Bolt
WB2
(5/16" flat washer, 5/16" t-nut)
Narrow Wall Cross
28
609220
5/16 x 1-3/8" Wafer Head Bolt w/ Nylok
Narrow Rock
Wall Frame,
Front View
064
065
#8 x 1-1/2" Wood Screw
52042512
8 Places
5/16" Flat Washer
4 Places
5/16" Flat Washer
#8 x 1-1/2" Wood Screw
52042512