KidKraft Cedar Summit Lookout Extreme Installation And Operating Instructions Manual page 45

Step 17: Door Panel Assembly
Part 2
C: On the outside of the (171) Door Window Panel attach the second Door Handle at approximately the same
place as the one on the inside. Use 2 (S37) #7 x 5/8" Pan Screws. (fig. 17.3)
D: Attach 2 Door Hinges on the outside of the (120) Door Window Panel on the opposite side from the Door
Handle. Judge spacing based on fig. 17.3. Use 3 (S37) #7 x 5/8" Pan Screws per Hinge.
Note: Hinge stops must be tight to (171) Door Window Panel. (fig. 17.4)
Fig. 17.3
S37
Door
Handle
171
Outside View
8 x
Fig. 17.4
Top View
S37
Hardware
#7 x 5/8" Pan Screw
S37
45
1/2"
Hinge Stop
Other Parts
1 x Door Handle
2 x Door Hinge