KidKraft Cedar Summit Lookout Extreme Installation And Operating Instructions Manual page 36

Step 12: Floor Assembly
Part 2
C: Measure the distance from the Back Wall to the Front Wall from the inside of the panels to make sure it
equals 35-3/4". Maintain this measurement when installing the floor boards. Starting at the Slide Wall place 3
(121) Floor Boards tight to the previously attached (121) Floor Board, followed by 1 (123) Floor Board then 8
more (121) Floor Boards. Make sure all boards are equally spaced then attach to (122) Long Floor Joist and
each (092) Side Joist with 6 (S20) #8 x 1-3/8" Wood Screws per board. (fig. 12.4, 12.5 and 12.6)
Fig. 12.4
Back Wall
121
x 8
123
121
Swing Wall
Wood Parts
11 x Floor Board 5/8 x 4-1/2 x 35-5/8"
121
1 x Floor Board 5/8 x 3-3/8 x 35-5/8"
123
Slide Wall
Front Wall
Hardware
72 x #8 x 1-3/8" Wood Screw
S20
36
Fig. 12.5
Top View
Slide
Wall
121 123
Fig. 12.6
x 6 per
S20
board
092
Back Wall
121
Tight
121
35-3/4"