KidKraft Cedar Summit Lookout Extreme Installation And Operating Instructions Manual page 110

Step 59: Install Bottom Barriers
Part 3
Note: It is important that all bottom barriers are installed flush to the lower frames leaving no gaps.
D: Tight to (592) Barrier Bottom D, place (594) Barrier Bottom E across the opening on the Narrow Wall Panel side.
Attach to the (511) Wall Post using 2 (S11) #8 x 2" Wood Screws and to (592) Barrier Bottom D using 2 (S11) #8 x 2"
Wood Screws, making sure that these screws are installed on an angle as shown in fig.59.3 & 59.4.
E: Place (595) Barrier Bottom A across the opening on the Rock Wall side so that it's tight to the Rock Wall Frame.
Attach to the (511) Wall Post using 2 (S11) #8 x 2" Wood Screws and to the (051) Rock Wall H using 2 (S11) #8 x 2"
Wood Screws, making sure that these screws are installed on an angle as shown in fig.59.3 & 59.5.
Fig. 59.4
592
594
Wood Parts
1 x Barrier Bottom E 15/16 x 3 x 21-1/4"
594
1 x Barrier Bottom A 15/16 x 3 x 21-1/4"
595
Fig. 59.3
S11 x 2
594
592
S11 x 2
No gap
8 x
511
Fig. 59.5
051
Hardware
#8 x 2" Wood Screw
S11
110
S11 x 2
595
051
511
595
S11 x 2