Install Climbing Rope - KidKraft Cedar Summit Lookout Extreme Installation And Operating Instructions Manual

Step 67: Install Climbing Rope
A: Feed one end of the Rope through the hole in (572) Rope Support and tie a knot in that end of the rope. (Fig.
67.1 & 67.3)
B: Tie a second knot in the rope on the opposite side of (572) Rope Support so that the knots are tight to the board
on both sides. (Fig. 67.1)
D: Tie 4 more knots in the rope making sure that they are evenly spaced from top to bottom. (fig. 67.4)
C: Feed rope through hole in bottom of (056) Rock Wall F and pull tight. Tie off the rope securely with a single knot.
(fig.67.2)
E: IMPORTANT: MAKE SURE THE ROPE IS TIGHT
Fig. 67.1
Inside
572
Rope
Fig. 67.2
056
Inside
Bottom View
Fig. 67.4
Fig. 67.3
119
Other Parts
1 x Rope