Advertisement
Step 6: Front Frame Assembly
A: Attach (1764) Floor Front to (1771) Posts with 2 (H6) 1/4 x 4-3/4" Bolt (with flat washer, lock washer and
t-nut). Hex Bolts to be installed from the inside of the assembly. (fig. 6.2)
B: Attach (1752) Top Front to (1771) Posts with 4 (S7) 12 x 2" Pan Screws (with 3/16" flat washer). (1752) Top
Front should be flush to the top of each (1771) Post. (fig. 6.1 & 6.2)
Fig. 6.2
S7
Wood Parts
1 x
Floor Front 2 x 3 x 38-1/2"
1764
1 x
Top Front 1 x 4 x 38-1/2"
1752
Flush
Flush
H6
H6
Parts removed
for clarity
Hardware
2 x
H6
1/4 x 4-3/4" Hex Bolt
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
S7
4 x
#12 x 2" Pan Screw (with 3/16" flat washer)
Fig. 6.1
Notice hole
towards top
1752
1771
1764
Notice hole
towards bottom
21
Slide wall side
Swing wall side
Advertisement
