Configuration and Use Manual
MMI-20039472
1 Before you begin
1.1 About this manual
This manual helps you configure, commission, use, maintain, and troubleshoot Micro Motion 5700
transmitters with intrinsically safe outputs.
Important
This manual assumes that the following conditions apply:
•
The transmitter has been installed correctly and completely according to the instructions in the
transmitter installation manual
•
The installation complies with all applicable safety requirements
•
The user is trained in government and corporate safety standards
1.2 Communications tools and protocols
You can use several different communications tools and protocols to interface with the transmitter, use
different tools in different locations, or use different tools for different tasks.
Tool
Display
ProLink III
For information about how to use the communication tools, see the appendices in this manual.
Tip
You may be able to use other communications tools, such as AMS Suite: Intelligent Device Manager, or the
™
Smart Wireless THUM
Adapter. Use of AMS or the Smart Wireless THUM Adapter is not discussed in this
manual. For more information on the Smart Wireless THUM Adapter, refer to the documentation available at
www.emerson.com.
1.3 Related documents
You can find all product documentation on the product documentation DVD shipped with the product or at
www.emerson.com.
See any of the following documents for more information:
•
Micro Motion 5700 Product Data Sheet
•
Micro Motion 5700 Transmitters with Intrinsically Safe Outputs: Installation Manual
•
Coriolis Flowmeter with Micro Motion Model 5700 Transmitters Safety Manual for Safety Instrumented Systems
(SIS)
•
Modbus Interface Tool
Configuration and Use Manual
Supported protocols
Not applicable
•
HART/Bell 202
•
Service port
Before you begin
June 2019
7