Emerson Micro Motion 5700 Configuration And Use Manual page 38

Configure process measurement
June 2019
ProLink III Device Tools → Configuration → Process Measurement → Flow → Volume Flow Rate Unit
Field Communicator Configure → Manual Setup → Measurements → Flow → Volume Flow Unit
Volume Flow Measurement Unit specifies the unit of measurement that will be displayed for the volume
flow rate. The unit used for the volume total and volume inventory is based on this unit.
Prerequisites
Before you configure Volume Flow Measurement Unit, be sure that Volume Flow Type is set to Liquid.
Procedure
Set Volume Flow Measurement Unit to the unit you want to use.
• Default: l/sec (liters per second)
Tip
If the measurement unit you want to use is not available, you can define a special measurement unit.
Options for Volume Flow Measurement Unit for liquid applications
The transmitter provides a standard set of measurement units for Volume Flow Measurement Unit, plus one
user-defined measurement unit. Different communications tools may use different labels for the units.
Unit description
Cubic feet per second
Cubic feet per minute
Cubic feet per hour
Cubic feet per day
Cubic meters per second
Cubic meters per minute
Cubic meters per hour
Cubic meters per day
U.S. gallons per second
U.S. gallons per minute
U.S. gallons per hour
U.S. gallons per day
Million U.S. gallons per day
Liters per second
Liters per minute
Liters per hour
Million liters per day
Imperial gallons per second
38
Display
ft3/s
ft3/min
ft3/h
ft3/d
m3/s
m3/min
m3/h
m3/d
gal/s
gal/m
gal/h
gal/d
MMgal/d
L/s
L/min
L/h
MML/d
Impgal/s
Micro Motion 5700 Transmitters with Intrinsically Safe Outputs
Configuration and Use Manual
Label
ProLink III Field Communicator
ft3/sec Cuft/s
ft3/min Cuft/min
ft3/hr Cuft/h
ft3/day Cuft/d
m3/sec Cum/s
m3/min Cum/min
m3/hr Cum/h
m3/day Cum/d
US gal/sec gal/s
US gal/min gal/min
US gal/hr gal/h
US gal/day gal/d
mil US gal/day MMgal/d
l/sec L/s
l/min L/in
l/hr L/h
mil l/day ML/d
Imp gal/sec Impgal/s
MMI-20039472