View The Licensed Features; Set Informational Parameters - Emerson Micro Motion 5700 Configuration And Use Manual

Configuration and Use Manual
MMI-20039472
The transmitter clock provides timestamp data for alerts, service logs, history logs, and all other timers and
dates in the system. You can set the clock for your local time or for any standard time you want to use.
Tip
You may find it convenient to set all of your transmitter clocks to the same time, even if the transmitters are
in different time zones.
Procedure
1. Select the time zone that you want to use.
2. If you need a custom time zone, select Special Time Zone and enter your time zone as a difference
from UTC (Coordinated Universal Time).
3. Set the time appropriately for the selected time zone.
Tip
The transmitter does not adjust for Daylight Savings Time. If you observe Daylight Savings Time, you
must reset the transmitter clock manually.
4. Set the month, day, and year.
The transmitter tracks the year and automatically adds a day for leap years.

2.6 View the licensed features

Display Menu → About → Licenses → Licensed Features
ProLink III Device Tools → Device Information → Licensed Features
Field Communicator Overview → Device Information → Licenses
The transmitter license controls the features that are enabled on the transmitter, including both software
applications and output channels. You can view the licensed features to ensure that the transmitter was
ordered with the required features.
Licensed features are purchased and available for permanent use. The options model code represents the
licensed features.
A trial license allows you to explore features before purchasing. The trial license enables the specified features
for a limited number of days. This number is displayed for reference. At the end of this period, the feature will
no longer be available.
To purchase additional features or request a trial license, document the Unique ID Number and current
license key from your transmitter and contact customer service. To enable the additional features or trial
license, you will need to install the new license on the transmitter.

2.7 Set informational parameters

Display Menu → Configuration → Device Information
ProLink III Device Tools → Configuration → Informational Parameters
Field Communicator Configure → Manual Setup → Device
Configuration and Use Manual
Quick start
June 2019
11