Rigol MSO1000Z Series Programming Manual page 76

RIGOL
:DECoder<n>:PARallel:NRTime
Syntax :DECoder<n>:PARallel:NRTime <time>
:DECoder<n>:PARallel:NRTime?
Description Set or query the noise rejection time of parallel decoding. The default unit is s.
Parameter
Name
<n>
<time>
Explanation Before sending this command, send the
turn on the noise rejection function.
Return The query returns the noise rejection time in scientific notation.
Format
Example :DECoder1:PARallel:NRTime 0.01
:DECoder1:PARallel:NRTime?
:DECoder<n>:PARallel:CCOMpensation
Syntax :DECoder<n>:PARallel:CCOMpensation <comp>
:DECoder<n>:PARallel:CCOMpensation?
Description Set or query the clock compensation time of parallel decoding. The default unit is s.
Parameter
Name
<n>
<comp>
Explanation Setting the compensation time can make fine adjustment of the pahse deviation

between the clock line and data line.
This command is invalid when the CLK channel source is set to OFF

(:DECoder<n>:PARallel:CLK).
Return The query returns the compensation time in scientific notation.
Format
Example :DECoder1:PARallel:CCOMpensation 0.01
:DECoder1:PARallel:CCOMpensation?
2-60
Type Range
Discrete {1|2}
Real 0.00s to 100ms
Type Range
Discrete {1|2}
Real -100ms to 100ms
:DECoder<n>:PARallel:NREJect
/*Set the noise rejection time to 10ms*/
/*The query returns 1.000000e-02*/
/*Set the compensation time to 10ms*/
/*The query returns 1.000000e-02*/
MSO1000Z/DS1000Z Programming Guide
Chapter 2 Command System
Default
--
0.00s
command to
Default
--
0.00s