Rigol MSO1000Z Series Programming Manual page 230

RIGOL
:TRIGger:SPI:SLEVel
Syntax :TRIGger:SPI:SLEVel <level>
:TRIGger:SPI:SLEVel?
Description Set or query the trigger level of the CS channel in SPI trigger. The unit is the same as the
current amplitude unit.
Parameter
Name
<level>
Explanation For VerticalScale, refer to :CHANnel<n>:SCALe. For OFFSet, refer

to :CHANnel<n>:OFFSet.
This command is only available when the signal source of the CS line is an analog

channel.
Return The query returns the trigger level of the CS channel in scientific notation.
Format
Example :TRIGger:SPI:SLEVel 0.16
:TRIGger:SPI:SLEVel?
:TRIGger:SPI:MODE
Syntax :TRIGger:SPI:MODE <mode>
:TRIGger:SPI:MODE?
Description Set or query the CS mode when the trigger condition is CS in SPI trigger.
Parameter
Name
<mode>
Return The query returns HIGH or LOW.
Format
Example :TRIGger:SPI:MODE LOW
:TRIGger:SPI:MODE?
Related :TRIGger:SPI:WHEN
Command
2-214
Type Range
(-5 x VerticalScale - OFFSet) to
Real
(5 x VerticalScale - OFFSet)
/*Set the trigger level of the CS channel to 160mV*/
/*The query returns 1.600000e-01*/
Type Range
Discrete {HIGH|LOW}
/*Set the CS mode to low*/
/*The query returns LOW*/
Chapter 2 Command System
MSO1000Z/DS1000Z Programming Guide
Default
0
Default
LOW