Rigol MSO1000Z Series Programming Manual page 35

Chapter 2 Command System
:CURSor:MANual:VUNit
Syntax :CURSor:MANual:VUNit <unit>
:CURSor:MANual:VUNit?
Description Set or query the vertical unit in the manual cursor measurement mode.
Parameter
Name
<unit>
Explanation PERCent: AY, BY, and BY-AY in the measurement results are expressed in percentage.

SOURce: the units of AY, BY, and BY-AY in the measurement results will be

automatically set to the unit of the current source.
Return The query returns PERC or SOUR.
Format
Example :CURSor:MANual:VUNit PERCent
:CURSor:MANual:VUNit?
Related :CHANnel<n>:UNITs
Command
:CURSor:MANual:AX
Syntax :CURSor:MANual:AX <x>
:CURSor:MANual:AX?
Description Set or query the horizontal position of cursor A in the manual cursor measurement mode.
Parameter
Name
<x>
Explanation The horizontal and vertical positions of the cursor are defined by the pixel coordinate of
the screen. The pixel coordinate of the screen ranges from (0,0) to (600,400). Wherein,
(0,0) is located at the left top corner of the screen and (600,400) is located at the right
bottom corner of the screen. The horizontal pixel range is from 0 to 600 and the vertical
pixel range is from 0 to 400.
Return The query returns an integer between 5 and 594.
Format
Example :CURSor:MANual:AX 200
:CURSor:MANual:AX?
MSO1000Z/DS1000Z Programming Guide
Type Range
Discrete {PERCent|SOURce}
/*The query returns PERC*/
Type Range
Integer 5 to 594
/*Set the horizontal position of cursor A to 200*/
/*The query returns 200*/
/*Set the system to express AY, BY, and BY-AY in the
measurement results in percentage*/
RIGOL
Default
SOURce
Default
100
2-19