Rigol MSO1000Z Series Programming Manual page 51

Chapter 2 Command System
:CURSor:XY:BY
Syntax :CURSor:XY:BY <y>
:CURSor:XY:BY?
Description Set or query the vertical position of cursor B in the XY cursor measurement mode.
Parameter
Name
<x>
Explanation In the XY timebase mode, the horizontal and vertical positions are defined by the pixel
coordinate of the XY display area. The pixel coordinate of the XY display area ranges from
(0,0) to (400,400). Wherein, (0,0) is located at the right top corner and (400,400) is
located at the left bottom corner. The horizontal and vertical pixel ranges are both from 0
to 400.
Return The query returns an integer between 5 and 394.
Format
Example :CURSor:XY:BY 200
:CURSor:XY:BY?
:CURSor:XY:AXValue?
Syntax :CURSor:XY:AXValue?
Description Query the X value of cursor A in the XY cursor measurement mode. The unit depends on
the amplitude unit of the corresponding channel.
Return The query returns the X value of cursor A in scientific notation.
Format
Example :CURSor:XY:AXValue?
Related :CHANnel<n>:UNITs
Command
:CURSor:XY:AYValue?
Syntax :CURSor:XY:AYValue?
Description Query the Y value of cursor A in the XY cursor measurement mode. The unit depends on
the amplitude unit of the corresponding channel.
Return The query returns the Y value of cursor A in scientific notation.
Format
Example :CURSor:XY:AYValue?
Related :CHANnel<n>:UNITs
Command
MSO1000Z/DS1000Z Programming Guide
Type Range
Integer 5 to 394
/*Set the vertical position of cursor B to 200*/
/*The query returns 200*/
/*The query returns 2.000000e+00*/
/*The query returns 2.000000e+00*/
RIGOL
Default
300
2-35