Rigol MSO1000Z Series Programming Manual page 216

RIGOL
:TRIGger:NEDGe:IDLE
Syntax :TRIGger:NEDGe:IDLE <NR3>
:TRIGger:NEDGe:IDLE?
Description Set or query the idle time in Nth edge trigger. The default unit is s.
Parameter
Return Format The query returns the idle time in scientific notation.
Example :TRIGger:NEDGe:IDLE 0.002
:TRIGger:NEDGe:IDLE?
:TRIGger:NEDGe:EDGE
Syntax :TRIGger:NEDGe:EDGE <NR1>
:TRIGger:NEDGe:EDGE?
Description Set or query the number of edges in Nth edge trigger.
Parameter
Return Format The query returns an integer between 1 and 65535.
Example :TRIGger:NEDGe:EDGE 20
:TRIGger:NEDGe:EDGE?
:TRIGger:NEDGe:LEVel
Syntax :TRIGger:NEDGe:LEVel <level>
:TRIGger:NEDGe:LEVel?
Description Set or query the trigger level in Nth edge trigger. The unit is the same as the current
amplitude unit.
Parameter
Explanation


Return Format The query returns the trigger level in scientific notation.
Example :TRIGger:NEDGe:LEVel 0.16
:TRIGger:NEDGe:LEVel?
2-200
Name Type Range
<NR3> Real 16ns to 10s
Name Type Range
<NR1> Integer 1 to 65535
Name Type Range
(-5 x VerticalScale - OFFSet) to
<level> Real
(5 x VerticalScale - OFFSet)
For VerticalScale, refer to :CHANnel<n>:SCALe. For OFFSet, refer
to :CHANnel<n>:OFFSet.
This command is only available when the signal source is an analog channel.
/*Set the idle time to 2ms*/
/*The query returns 2.000000e-03*/
/*Set the number of edges to 20*/
/*The query returns 20*/
/*Set the trigger level to 160mV*/
/*The query returns 1.600000e-01*/
MSO1000Z/DS1000Z Programming Guide
Chapter 2 Command System
Default
1μs
Default
2
Default
0