Rigol MSO1000Z Series Programming Manual page 213

Chapter 2 Command System
:TRIGger:SHOLd:SLOPe
Syntax :TRIGger:SHOLd:SLOPe <slope>
:TRIGger:SHOLd:SLOPe?
Description Set or query the edge type in setup/hold trigger.
Parameter
Name
<slope>
Return The query returns POS or NEG.
Format
Example :TRIGger:SHOLd:SLOPe NEGative
:TRIGger:SHOLd:SLOPe?
:TRIGger:SHOLd:PATTern
Syntax :TRIGger:SHOLd:PATTern <pattern>
:TRIGger:SHOLd:PATTern?
Description Set or query the data type in setup/hold trigger.
Parameter
Name
<pattern>
Explanation H: high level
L: low level
Return The query returns H or L.
Format
Example :TRIGger:SHOLd:PATTern L
:TRIGger:SHOLd:PATTern?
:TRIGger:SHOLd:TYPe
Syntax :TRIGger:SHOLd:TYPe <type>
:TRIGger:SHOLd:TYPe?
Description Set or query the setup type in setup/hold trigger.
Parameter
Name
<type>
Explanation SETup: the oscilloscope triggers when the setup time is less than the setting value

(:TRIGger:SHOLd:STIMe).
HOLd: the oscilloscope triggers when the hold time is less than the setting value

(:TRIGger:SHOLd:HTIMe).
SETHOLd: the oscilloscope triggers when the setup time or hold time is less than the

corresponding setting value
Return The query returns SET, HOL, or SETHOL.
Format
Example :TRIGger:SHOLd:TYPe SETHOLd
:TRIGger:SHOLd:TYPe?
MSO1000Z/DS1000Z Programming Guide
Type Range
Discrete {POSitive|NEGative}
/*Set the edge type to falling edge*/
Type Range
Discrete {H|L}
/*Set the data type to L*/
/*The query returns L*/
Type Range
Discrete {SETup|HOLd|SETHOLd}
(:TRIGger:SHOLd:STIMe
/*Set the setup type to setup&hold*/
/*The query returns SETHOL*/
/*The query returns NEG*/
or :TRIGger:SHOLd:HTIMe).
RIGOL
Default
POSitive
Default
H
Default
SETup
2-197