Rigol MSO1000Z Series Programming Manual page 41

Chapter 2 Command System
:CURSor:TRACk:SOURce2
Syntax :CURSor:TRACk:SOURce2 <source>
:CURSor:TRACk:SOURce2?
Description Set or query the channel source of cursor B in the track cursor measurement mode.
Parameter
Name
<source>
Explanation Only the channels enabled can be selected as the channel source.
Return The query returns OFF, CHAN1, CHAN2, CHAN3, CHAN4, or MATH.
Format
Example :CURSor:TRACk:SOURce2 CHANnel2
:CURSor:TRACk:SOURce2?
:CURSor:TRACk:AX
Syntax :CURSor:TRACk:AX <x>
:CURSor:TRACk:AX?
Description Set or query the horizontal position of cursor A in the track cursor measurement mode.
Parameter
Name
<x>
Explanation The horizontal and vertical positions of the cursor are defined by the pixel coordinate of
the screen. The pixel coordinate of the screen ranges from (0,0) to (600,400). Wherein,
(0,0) is located at the left top corner of the screen and (600,400) is located at the right
bottom corner of the screen. The horizontal pixel range is from 0 to 600 and the vertical
pixel range is from 0 to 400.
Return The query returns an integer between 5 and 594.
Format
Example :CURSor:TRACk:AX 200
:CURSor:TRACk:AX?
MSO1000Z/DS1000Z Programming Guide
Type Range
{OFF|CHANnel1|CHANnel2|CHANnel3|
Discrete
CHANnel4|MATH}
Type Range
Integer 5 to 594
/*Set the horizontal position of cursor A to 200*/
/*The query returns 200*/
/*Set the channel source to CH2*/
/*The query returns CHAN2*/
RIGOL
Default
CHANnel1
Default
100
2-25