Rigol MSO1000Z Series Programming Manual page 225

Chapter 2 Command System
:TRIGger:IIC:CLEVel
Syntax :TRIGger:IIC:CLEVel <level>
:TRIGger:IIC:CLEVel?
Description Set or query the trigger level of SCL in I2C trigger. The unit is the same as the
current amplitude unit.
Parameter
Explanation


Return Format The query returns the trigger level of SCL in scientific notation.
Example :TRIGger:IIC:CLEVel 0.16
:TRIGger:IIC:CLEVel?
:TRIGger:IIC:DLEVel
Syntax :TRIGger:IIC:DLEVel <level>
:TRIGger:IIC:DLEVel?
Description Set or query the trigger level of SDA in I2C trigger. The unit is the same as the
current amplitude unit.
Parameter
Explanation


Return Format The query returns the trigger level of SDA in scientific notation.
Example :TRIGger:IIC:DLEVel 0.16
:TRIGger:IIC:DLEVel?
MSO1000Z/DS1000Z Programming Guide
Name Type Range
(-5 x VerticalScale - OFFSet) to
<level> Real
(5 x VerticalScale - OFFSet)
For VerticalScale, refer to :CHANnel<n>:SCALe. For OFFSet, refer
to :CHANnel<n>:OFFSet.
This command is only available when the signal source of the clock line is an
analog channel.
Name Type Range
(-5 x VerticalScale - OFFSet) to
<level> Real
(5 x VerticalScale - OFFSet)
For VerticalScale, refer to :CHANnel<n>:SCALe. For OFFSet, refer
to :CHANnel<n>:OFFSet.
This command is only available when the signal source of the data line is an
analog channel.
/*Set the trigger level of SCL to 160mV*/
/*The query returns 1.600000e-01*/
/*Set the trigger level of SDA to 160mV*/
/*The query returns 1.600000e-01*/
RIGOL
Default
0
Default
0
2-209