Rigol MSO1000Z Series Programming Manual page 50

RIGOL
:CURSor:XY:BX
Syntax :CURSor:XY:BX <x>
:CURSor:XY:BX?
Description Set or query the horizontal position of cursor B in the XY cursor measurement mode.
Parameter
Name
<x>
Explanation In the XY timebase mode, the horizontal and vertical positions of the cursor are defined
by the pixel coordinate of the XY display area. The pixel coordinate of the screen ranges
from (0,0) to (400,400). Wherein, (0,0) is located at the right top corner and (400,400) is
located at the left bottom corner. The horizontal and vertical pixel ranges are both from 0
to 400.
Return The query returns an integer between 5 and 394.
Format
Example :CURSor:XY:BX 200
:CURSor:XY:BX?
:CURSor:XY:AY
Syntax :CURSor:XY:AY <y>
:CURSor:XY:AY?
Description Set or query the vetical position of cursor A in the XY cursor measurement mode.
Parameter
Name
<x>
Explanation In the XY timebase mode, the horizontal and vertical positions are defined by the pixel
coordinate of the XY display area. The pixel coordinate of the screen ranges from (0,0) to
(400,400). Wherein, (0,0) is located at the right top corner and (400,400) is located at the
left bottom corner. The horizontal and vertical pixel ranges are both from 0 to 400.
Return The query returns an integer between 5 and 394.
Format
Example :CURSor:XY:AY 200
:CURSor:XY:AY?
2-34
Type Range
Integer 5 to 394
/*Set the horizontal position of cursor B to 200*/
/*The query returns 200*/
Type Range
Integer 5 to 394
/*Set the vertical position of cursor A to 200*/
/*The query returns 200*/
Chapter 2 Command System
Default
300
Default
100
MSO1000Z/DS1000Z Programming Guide