Rigol MSO1000Z Series Programming Manual page 188

RIGOL
:TRIGger:SLOPe:BLEVel
Syntax :TRIGger:SLOPe:BLEVel <level>
:TRIGger:SLOPe:BLEVel?
Description Set or query the lower limit of the trigger level in slope trigger. The unit is the same as the
current amplitude unit.
Parameter
Name
<level>
Explanation For VerticalScale, refer to :CHANnel<n>:SCALe. For OFFSet, refer
to :CHANnel<n>:OFFSet.
Return The query returns the lower limit of the trigger level in scientific notation.
Format
Example :TRIGger:SLOPe:BLEVel 0.16
:TRIGger:SLOPe:BLEVel?
Related :TRIGger:SLOPe:ALEVel
Command
2-172
Type Range
(-5 x VerticalScale - OFFSet) to
Real
(5 x VerticalScale - OFFSet)
/*Set the lower limit of the trigger level to 160mV*/
/*The query returns 1.600000e-01*/
Chapter 2 Command System
MSO1000Z/DS1000Z Programming Guide
Default
0