Rigol MSO1000Z Series Programming Manual page 218

RIGOL
:TRIGger:RS232:WHEN
Syntax :TRIGger:RS232:WHEN <when>
:TRIGger:RS232:WHEN?
Description Set or query the trigger condition in RS232 trigger.
Parameter
Name
<when>
Explanation




Return Format The query returns STAR, ERR, PAR, or DATA.
Example :TRIGger:RS232:WHEN ERRor
:TRIGger:RS232:WHEN?
Related :TRIGger:RS232:DATA
Command
:TRIGger:RS232:PARity
Syntax :TRIGger:RS232:PARity <parity>
:TRIGger:RS232:PARity?
Description Set or query the parity type when the trigger condition is ERRor or PARity in RS232
trigger.
Parameter
Name
<parity>
Explanation When the trigger condition is PARity, the parity type cannot be set to NONE. At this
point, the default parity type is ODD.
Return Format The query returns EVEN, ODD, or NONE.
Example :TRIGger:RS232:PARity EVEN
:TRIGger:RS232:PARity?
Related :TRIGger:RS232:WHEN
Command
2-202
Type Range
Discrete {STARt|ERRor|PARity|DATA}
STARt: trigger on the start frame position.
ERRor: trigger when error frame is detected.
PARity: trigger when check error is detected.
DATA: trigger on the last bit of the preset data bits and even-odd check bits.
Type Range
Discrete {EVEN|ODD|NONE}
/*Set the trigger condition to error frame*/
/*The query returns ERR*/
/*Set the parity type to even*/
/*The query returns EVEN*/
MSO1000Z/DS1000Z Programming Guide
Chapter 2 Command System
Default
STARt
Default
Error Frame: NONE
Check Error: ODD