Rigol MSO1000Z Series Programming Manual page 179

Chapter 2 Command System
:TRIGger:EDGe:LEVel
Syntax :TRIGger:EDGe:LEVel <level>
:TRIGger:EDGe:LEVel?
Description Set or query the trigger level in edge trigger. The unit is the same as the current
amplitude unit of the signal source selected.
Parameter
Name
<level>
Explanation For VerticalScale, refer to the

the
This command is only available when the signal source is an analog channel.

Return The query returns the trigger level in scientific notation.
Format
Example :TRIGger:EDGe:LEVel 0.16
:TRIGger:EDGe:LEVel?
MSO1000Z/DS1000Z Programming Guide
Type Range
(-5 x VerticalScale - OFFSet) to
Real
(5 x VerticalScale - OFFSet)
:CHANnel<n>:OFFSet
:CHANnel<n>:SCALe
command.
/*Set the trigger level to 160mV*/
/*The query returns 1.600000e-01*/
Default
0
command. For OFFSet, refer to
RIGOL
2-163